Configuring Your Camera
71
Contents Back Next Index
Setting Battery Save Onset
When the DCS 645 is powered by battery and
you don’t touch any controls during the specified
Battery Save Onset time, it enters Battery Save
state. You can change the onset time (page 82)
from 1:00:00 to 23:59:59 (HH:MM:SS).
The default onset time is 60 minutes.
1Display the Properties menu (page 70).
2Choose Battery Save Onset from the
Properties menu.
The Battery Save Onset screen appears.
3Press the left or right side of the Four-way
switch to sequence through the numeric fields.
4Press the top or bottom of the Four-way switch
to change the highlighted numeric value.
5Press the OK or Cancel button.
Setting Display Off Time
Extended use of the Image LCD will drain your
battery. For this reason, the LCD turns off after
the specified Display Off Time.
The default Display Off Time is 60 seconds.
1Display the Properties menu (page 70).
2Choose Display Off Time from the Properties
menu.
3Press the left or right side of the Four-way
switch to sequence through the numeric fields.
4Press the top or bottom of the Four-way switch
to change the highlighted numeric value.
5Press the OK or Cancel button.