Kodak 645 Attaching the DCS 645 to the Camera Body and Connecting Accessories

The Basics
51
Contents Back Next Index
Attaching the DCS 645 to the Camera Body and Connecting Accessories
Attaching the DCS 645 to the Camera
Body
1To remove the body cap, rotate the DCS 645
Release button to the left and press, then pivot
the top of the cap away from the DCS 645.
IMPORTANT:
Do not touch or strike the exposed IR filter or
anti-aliasing filter or set it down on a surface.
Do not install the DCS 645 battery or connect the
AC adapter to the DCS 645 until it is mounted on
the camera body.
DCS 645
Release
button