The Basics
53
Contents Back Next Index
Disconnecting the DCS 645 from the Camera Body
1Place the camera on a table or other flat
surface.
2If the DCS 645 is being powered by battery,
remove the battery.
If the DCS 645 is being powered by AC
adapter, disconnect the AC adapter.
3Remove the IEEE 1394 cable (page 78) if it is
connected.
4Rotate the DCS 645 Release button to the left
and press, then pivot the top of the camera
body away from the DCS 645. 5Carefully remove the DCS 645 from the
camera body.
Connecting Flash/Strobe Units
Connect flash and studio strobes following the
instructions in your camera body's manual.
DCS 645
Release
button