Inside the printer (J2 or J3 error)
M2
1.Open the front cover and release lever M2 to unlock the vacuum unit.
M5 | 2. Open the transport section release plate (M4). Remove the |
| |
| paper by rotating the transport roller knob (M5) or the |
| synchronizing roller knob (M3) in the direction of the arrow. |
M4 M3
3. When the leading edge of jammed paper has reached into the fusing unit, remove the paper toward the inside of the printer while depressing and rotating the roller knob (M1) in the direction of the arrow.
NOTE: Rotate the roller knob (M1) only in the direction of the arrow and do not remove the paper by pulling it into the paper exit direction.
M1
November 1996 |
