2.Remove the (4) paper guides by lifting them straight up. Clean the outside of housing with a soft cloth.
3.Carefully clean the wires using the cleaning pen contained in the accessories for the machine as in the illustration.
4.Reinstall the four paper guides. Insert the image transfer/paper separator charger onto the guides of the suction unit until the charger is locked by the front edge of the guides. Lift up the vacuum unit release lever (M2) and lock it into the EP unit. Close the front cover.
NOTE: Be sure the charger is installed correctly. If the vacuum unit will not lock into place or if there are printing problems, reinstall the charger.
November 1996 |
