Kodak 990 Environmental requirements Dimensions and weight, Humidity, Dissipation, Height, Width

Voltage requirements

AC power quality and conditioning

Environmental requirements

Dimensions and weight

∙Impedance between neutral and ground wires: less than 2 ohms

∙Neutral to ground voltage: less than 1 volt AC maximum

∙Voltage drop across circuit breaker: less than 0.1 volts

∙Impluse voltage spikes transients: less than 50% of nominal line voltage

∙Surge voltage: less than 5’1 of nominal line voltage

In some locations, even though recommended wiring practices have been followed, the power reaching the scanner may exhibit unstable power quality characteristics. System errors and intermittent data loss could result.

Power conditioning equipment may be required to overcome the power quality problems. Kodak can make arrangements for an on-site power analysis in an area with exceptionally unstable power.

Consult with your electrical contractor or utility company to ensure that on- site wiring complies with the specifications and that wall outlets and comply with codes

This equipment can operate in a typical office environment under the following conditions:

Scanner	Temperature	Relative	Heat
		Humidity	Dissipation
9500/990	59° to 86° F	15 to 76%	5200 Btu
	15° to 30° C

This equipment has the following dimensions and weight, with all optional accessories included:

Scanner	Height	Width	Depth	Weight
9500	48 in.	29 in.	51 in.	630 lbs
	122 cm	74 cm	130 cm	227 kg
990	48 in.	29 in.	51 in.	785 lbs
	122 cm	74 cm	130 cm	356 kg

NOTE: With the Workstation Side Console, the width is 60 in (152 cm).

Space requirements Adequate work space must be provided to allow normal operation, proper