Kodak CX4230 manual Camera/Computer Communications, Camera Communications Problem Cause Solution

Chapter 9

Camera/Computer Communications

Camera Communications

Problem	Cause	Solution
The computer	There is a problem with	See the following file on the
cannot	the configuration of the	KODAK EASYSHARE Software
communicate with	USB port on your	CD: USB.html
the camera.	computer.	Or, go to: www.kodak.com/
		go/camerasupport
	Camera power is off.	Turn on the camera
		(page 5).
	Battery is not charged.	Replace or recharge the
		batteries (page 4, page 54).
	Some Advanced Power	See the Power Management
	Management utilities on	section of your laptop user’s
	laptops can turn off	guide to disable this feature.
	ports to save battery life.
	USB cable is not	Connect cable to camera and
	securely connected.	computer port (page 47).
	Software is not installed.	Install the software
		(page 45).
	There are too many	Disconnect your camera
	applications running on	from the computer. Close all
	your computer.	software applications,
		reconnect your camera and
		try again.
	The Battery Monitor or	Close that software before
	similar software runs	starting the KODAK Software.
	constantly.

63