Chapter 1

Attaching the Wrist Strap

1Thread the short loop of the strap through

the wrist strap post.

2 Thread the long end of the strap through the short loop. Pull until secure.

Loading the Batteries

A KODAK CRV3 Lithium Battery, or equivalent, is included with your camera.*

or

1 Turn off the camera.

2 On the bottom of the camera, slide the battery door and lift to open.

3 Insert the CRV3 Lithium battery or 2, AA batteries.*

4 Close the battery door.

IMPORTANT BATTERY INFORMATION

For acceptable battery life and to make sure your camera operates dependably, do not use alkaline batteries.

See page 85 for the types of batteries you can use in your camera.

*If your camera was packaged with a KODAK EASYSHARE Camera Dock II, see page 52 for details on using the KODAK EASYSHARE Ni-MH Rechargeable Battery Pack.

4

Page 12
Image 12
Kodak CX4230 manual Attaching the Wrist Strap, Loading the Batteries