Kodak CX6200 manual Camera/Computer Communications, Camerasupport

Chapter 10

Camera/Computer Communications

Problem	Cause	Solution
The computer	There is a problem with	See this file on the EasyShare
cannot	the configuration of the	software CD: USB.html Or, go to:
communicate	USB port on the	www.kodak.com/go/
with the	computer.	camerasupport
camera.
	Camera power is off.	Turn on the camera (page 6).
(For
	Battery is not charged.	Recharge the battery (page 68).
communication
problems with	Some Advanced Power	See the Power Management section
a camera dock	Management utilities on	of the laptop user’s guide to disable
6000, see	laptops turn off ports to	this feature.
page 65.)	save battery life.
	USB cable is not	Connect cable to camera and
	securely connected.	computer port (page 61).
	Software is not installed.	Install the software
		(page 57).
	Software is installed	Disconnect the USB cable. Close all
	incorrectly.	open applications. Uninstall, then
		re-install the software (page 57).
		To uninstall, go to Start/Settings/
		Control Panel/Add/Remove
		Programs.
	Too many applications	Disconnect camera from the
	are running on the	computer. Close all software
	computer.	applications, reconnect camera.
	The Battery Monitor or	Close that software before starting
	similar software runs	the Kodak software.
	constantly.

77