64
Chapter 9
Installing the Custom Camera Insert
A universal insert is pre-installed in the camera dock. It allows all Kodak
EasyShare CX/DX6000 series and LS600 series cameras to use the camera
dock.
A custom insert is included with your camera. It provides a perfect fit for
your Kodak EasyShare CX6200 digital camera.

Remove the Universal Insert

1Place your thumbs in the indents in the
front of the universal insert; press in and
lift.
2Lift the insert at the side edge and remove
the insert from the dock.
3Save the universal insert as a spare.

Install the Custom Insert

1Position the custom insert so the cutout
lines up with the connector on the camera
dock.
2Fit the insert into the groove in the dock and
snap it into place.
You can purchase a custom insert for your
camera at dealer of Kodak products. See
www.kodak.com/go/cx6200accessories.
Cutout
Connector