64

Using a USB Cable Connection

If you have a personal computer and are running Windows 98, or a
Macinto sh comp uter, you may be able to connect the cam era using a
Universal Serial Bus connection. The USB interface provides an easy and
faster alternative to serial cable connection. However, since USB
connections are relatively new, Kodak only recommends and supports
using the camera with the systems listed above. When connecting the
camera, it is a good idea to use a Kodak-specified AC adapter
(see page 5).
1Set the Mode dial to Connect.
2Plug the appr opriate en d of USB ca ble into
the port on the computer with the USB
symbol.
If the port is not labeled, see your
computer User’s Guide for a diagram that
illustrates all of the external ports.
3Open the serial/US B por t door o n the side
of the camera.
4Plug the other end of the USB cable into
the camera serial/USB port.
5Slide the POWER switch to the right to
turn on the camera.
If you get a message o n yo ur computer
stating that you are not connected, refer to
the USB.PDF document installed with the
software, or the online help for
troubleshooting information.