59
8Connecting to the Computer
CAUTION:
CAUTION:CAUTION:
CAUTION:
Install Kodak EasyShare software before connecting the
camera or optional dock to the computer. Failure to do so
may cause the software to load incorrectly.

Connecting to the Computer

You can transfer pictures and videos from the camera to the computer using
either the provided USB cable or the optional Kodak EasyShare camera dock
or camera dock II. See page 61 for connecting with a camera dock.

Transferring Pictures With the USB Cable

1Turn off the camera.
2Plug the labeled end of the USB cable
into the labeled USB port on your computer.
See your computer Users Guide for details.
3Plug the other end of the USB cable into the
labeled USB port on the camera.
An optional 3-volt AC adapter is available
to save battery power (see page 95).
4Turn on the camera.
Kodak EasyShare software prompts you
through the transfer process.
NOTE: You can also use a Kodak multi-card reader or Kodak SD multimedia
card reader-writer to transfer your pictures. Purchase accessories at a
dealer of Kodak products. See www.kodak.com/go/dx4530accessories.