Chapter 1
Setting the Date and Time
Setting the Date & Time, First Time
The Date and Time have been reset message appears the first time you turn on the camera or if the battery is removed for an extended time.
| 1 | SET DATE & TIME is highlighted. Press the |
|
| OK button. |
|
| (Select Cancel to set the date and time at a |
|
| later time.) |
|
| The Date & Time screen appears. |
OK | 2 | Go to step 4 below, Setting the Date & Time, |
|
| Anytime. |
Setting the Date & Time, Anytime
1
2Press 
to highlight Setup, then press
the OK button.
3 Press 
to highlight Date & Time, then press the OK button.
OK | Menu | The date format is YYYY/MM/DD. The time |
is displayed in a 24-hour format.
4Press 
to adjust the date and time. Press 
to advance to the next setting.
5When finished, press the OK button.
6Press the Menu button to exit the menu. The setting remains until you change it.
NOTE: Depending on your computer operating system, Kodak EasyShare software may allow your computer to automatically update the camera clock when you connect the camera. See the Kodak EasyShare software Help for details.
8
