Kodak DX7440 manual Picture quality problems, Camera ready light status, Status Cause

Troubleshooting

Picture quality problems

If...	Try one or more of the following
The picture is too dark	■ Use Fill flash (page 15) or change your position so light is
or underexposed	not behind the subject.
	■ Move so that the distance between you and the subject is
	within the effective flash range (page 15).
	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Decrease the shutter speed or increase the ISO speed
	(page 13).
The picture is too light	■ Turn the flash off (page 15).
	■ Move so that the distance between you and the subject is
	within the effective flash range (see page 15).
	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Increase the shutter speed or decrease the ISO speed
	(page 13).
The picture is not clear	■ To automatically set exposure and focus, press the Shutter
	button halfway and hold. When the ready light glows
	green, press the Shutter button the rest of the way
	down to take the picture.
	■ Clean the lens (page 52).
	■ Make sure the camera is not in Close-up mode if you are
	more than 23.7 in. (60 cm) from your subject.
	■ Place the camera on a flat, steady surface or use a tripod.

Camera ready light status

Status	Cause
Ready light glows	Shutter button is pressed halfway down. Focus and exposure
steady green.	are set.
Ready light blinks	Picture is being processed and saved to the camera.
green.
	Pictures are being transferred to computer; camera is
	connected.
	Camera firmware upgrade is in process.

46 www.kodak.com/go/support