Taking pictures and videos
14 www.kodak.com/go/support
Settings apply only in P, A, S, M, and C modes
Settings you change in P, A, S, or M modes apply only to pictures taken in P,
A, S, and M modes. Settings you change in C mode apply only to pictures
taken in C mode.
For example, if you change the Color Mode to Sepia while in P, A, S, or M
mode, then Auto & Scene modes retain the default setting of Color.
NOTE: The settings, including Flash, are maintained for P, A, S, M, and C modes—even when
you change modes or turn off the camera. Use Reset to Default (see page23) to reset P, A,
S, M, or C mode to its default setting.
Using the jog dial to change P, A, S, M, or C mode settings
1Turn the Mode dial to P, A, S, M, or C.
The mode settings are displayed. Available settings are white; unavailable
settings are grey.
2Use the jog dial:
■Rotate the jog dial to move the cursor to a setting, such as .
■Press the jog dial to open the setting.
■Rotate the jog dial to change the value of the setting. .
(Red settings are out of range and may cause unacceptable image/print
quality. Adjust the value higher or lower until it turns yellow.)
■Press the jog dial to save the setting.
3Press the Menu button to change other settings. (See page20.)
4Take a picture.
the cursor or
Rotate to move
change settings.
Press to open or
save settings.
Jog dial