EVF/LCD toggle button

Getting started

Changing the display, EVF or LCD

Your camera has an Electronic Viewfinder (EVF). The EVF, like the LCD (Liquid Crystal Display) screen, displays what the camera captures.

Press the EVF/LCD toggle button to change the screen from EVF to LCD, and back.

The selection remains until you press the button again.

NOTE: The EVF/LCD screen turns off after 1 minute if no pictures are taken. Press any button to turn the display back on.

Using the diopter dial

You can adjust the EVF sharpness for your eyesight.

Diopter dial

 

Look through the EVF.

EVF

 

 

 

Turn the Diopter dial until the viewfinder

 

 

image is sharp.

Checking camera and picture status

The icons that appear on the EVF/LCD screen indicate the active camera and picture settings.

Status

Press the Status button to turn the icons off and on.

button

6

www.kodak.com/go/support

Page 14
Image 14
Kodak DX7590 manual Changing the display, EVF or LCD, Checking camera and picture status, Using the diopter dial