Kodak MX1063, M1063, MD1063 Using burst, Using exposure compensation to adjust picture brightness

Doing more with your camera

Using burst

Use burst to take up to 3 pictures in rapid succession.

1In most Still modes, press the button repeatedly until appears on the LCD.

2Press the Shutter button halfway to focus and set

exposure.

button 3 Press the Shutter button completely down and hold it to take pictures.

The camera stops taking pictures when you release the Shutter button, when the pictures are taken, or when there is no more storage space.

NOTE: During quickview, you can delete all pictures in the burst series. To delete selectively, do so in Review (see page 17). Burst is not available in menu mode.

Using exposure compensation to adjust picture brightness

Before you take a picture, you can adjust exposure compensation to make pictures darker or lighter.

■Press to decrease exposure compensation.

■Press to increase exposure compensation.

The exposure compensation level is shown on the LCD; the LCD gets brighter or dimmer.

Using the framing grid to compose a picture

The framing grid divides the LCD into thirds—vertically and horizontally. This is helpful if, for example, you want to balance a picture between water, earth, and sky.

To turn on/off the framing grid, repeatedly press

.

www.kodak.com/go/support 35