Kodak M883 manual Connecting the camera to a PictBridge enabled printer

Transferring and printing pictures

Connecting the camera to a PictBridge enabled printer

1Turn off the camera and printer.

2Connect the appropriate USB cable from the camera to the printer. See your printer user guide for details or www.kodak.com/go/m883accessories to order cables.

Printing from a PictBridge enabled printer

1Turn on the printer. Turn on the camera.

The PictBridge logo is displayed, followed by the current picture and menu. (If no pictures are found, a message is displayed.) If the menu interface turns off, press any button to redisplay it.

2Press to choose a printing option, then press the OK button.

Current Picture—Press to choose a picture. Choose the number of copies.

Tagged Pictures—If your printer is capable, print pictures that you tagged for printing and choose a print size.

Index Print—Print thumbnails of all pictures. (This option requires one or more sheets of paper.) If the printer is capable, choose a print size.

All Pictures—Print all pictures in internal memory, or on a card. Choose the number of copies.

Image Storage—Access Internal/Card.

NOTE: During direct printing, pictures are not permanently transferred or saved to the printer. To transfer pictures to your computer, see page 44.

Disconnecting the camera from a PictBridge enabled printer

1Turn off the camera and printer.

2Disconnect the USB cable from the camera and the printer.

www.kodak.com/go/support 47