Kodak Module 9 Process ECP-2E Specifications 9-25, Fixer To be used with persulfate bleach (may also be used with alternate process bleaches), (can be used with alternate process bleaches, not persulfate)

Process ECP-2E Specifications 9-25
Fixer
To be used with persulfate bleach (may also be used with alternate process bleaches)
To process a large quantity (more than one tank turnover) of VISION Premier Color Print Film, the normal
replenishment flow rate of the fix may need to be increased by up to 30%.
Alternate Process Fixer
(can be used with alternate process bleaches, not persulfate)
To process a large quantity (more than one tank turnover) of VISION Premier Color Print Film, the normal
replenishment flow rate of the fix may need to be increased by up to 30%.
Constituent Fresh Tank Fresh and Seasoned Tank
Analytical Specifications Fresh Replenisher Replenisher Analytical Specifications
Fixer (F-35b) (F-35-bR)
Water 21-38°C (70-100°F) 800 mL 700 mL
Ammonium Thiosulfate Solution (58%) 100 mL 100 ± 10 mL/L 170.0 mL 170 ± 10 mL/L
Sodium Sulfite (Anhydrous) 2.5 gL 15.0 ± 3.0 g/L
*
* Test method (using 3 mL sample) measures sulfite and bisulfite together as total sulfite (Na2SO3).
16.0 g 23.0 ± 3.0 g/L
*
Sodium Bisulfite (Anhydrous) 10.3 g 5.8 g
Potassium Iodide 0.50 g 0.50 ± 0.02 g/L 0.70 g 0.70 ± 0.02 g/L
Water to make 1 L 1 L
pH at 25.0°C (77.0°F) 5.8 ± 0.2
†
6.6 ± 0.2
†
† Fixer pH may decrease with certain operating conditions when electrolytically desilvering the fixer. If the fixer is not desilvered or desilvered by the
batch method, the replenisher pH should be 5.00 ± 0.015. Care should be taken to avoid fixer pH lower than 4.5 since lower fixer pH could cause
sulfurization of the fixer.
Specific Gravity 25.0°C (77.0°F) 1.060 ± 0.003 (fresh) 1.083 ± 0.003
Hypo Index (3 mL sample) 24.0 ± 2.0 38.0 ± 2.0
Constituent Fresh Tank Fresh and Seasoned Tank
Analytical Specifications Fresh Replenisher Replenisher Analytical Specifications
Fixer (F-35d) (F-35dR)
Water 21-38°C (70 to 100°F) 800 mL 700 mL
Ammonium Thiosulfate Solution (58%) 100 mL 100 mL ± 10 mL/L 170.0 mL 170 mL ± 10 mL/L
Sodium Sulfite (Anhydrous) None 15.0 ± 3.0 g/L 2.5 g 20.5 ± 3.0 g/L
*
* Test method (using 3 mL sample) measures sulfite and bisulfite together as total sulfite (Na2SO3).
Sodium Bisulfite (Anhydrous) 13.0 g 17.5 g
Sulfuric Acid (7.0 N) 2.7 mL None
Water to make 1 L 1 L
pH at 25.0°C (77.0°F) 5.00 ± 0.15
†
5.80 ± 0.15
†
† Fixer pH may decrease with certain operating conditio ns when electr olytically des ilve ring the fix er . If the fix er is not de silvered or is desilvered by the
batch method, the replenisher pH should be 5.00 ± 0.15. Care should be taken to avoid fixer pH lower than 4.5 since lower fixer pH could cause
sulfurization of the fixer.
Specific Gravity at 25.0°C (77.0°F) 1.060 ± 0.003 (fresh) 1.083 ± 0.003
Hypo Index (3 mL sample) 24.0 ± 2.0 38.0 ± 2.0