Kodak Module 9 specifications Alternate Developer, Stop, Specifications, Developer SD-51

Alternate Developer

Constituent	Fresh Tank	Fresh and Seasoned Tank	Fresh	Replenisher Analytical
		Analytical Specifications	Replenisher	Specifications
Developer	(SD-51)
Water 24-38°C (75-100°F)	900 mL		900 mL
(Ethylenedinitrilo) Tetraacetic Acid	4.0 g		4.8 g
Tetrasodium Salt
EASTMAN Developer Stabilizer No. 1*	0.20 g		0.25 g
Sodium Sulfite (Anhydrous)†	4.35 g	4.00 ± 0.25 g/L	4.50 g	4.20 ± 0.25 g/L
KODAK Color Developing Agent CD-2†	2.95 g	2.70 ± 0.25 g/L	5.80 g	5.70 ± 0.25 g/L
Sodium Carbonate (Anhydrous)	17.1 g		18.0 g
Sodium Bromide (Anhydrous)	1.72 g	1.72 ± 0.10 g/L	1.60 g	1.60 ± 0.10 g/L
Sodium Hydroxide	None		0.90 g
Sulfuric Acid (7.0 N)	0.62 mL		None
Water to make	1000 mL		1000 mL
pH at 25.0°C (77.0°F)		10.59 ± 0.05		11.20 ± 0.05
Specific Gravity at 25.0°C (77.0°F)		1.020 ± 0.003‡		1.023 ± 0.003
Total Alkalinity (10 mL sample)		35.0 ± 2 mL		39.0 ± 2 mL

WARNING! May cause eye and skin irritation and allergic skin reaction. Avoid contact with eyes, skin, and clothing.

*EASTMAN Developer Stabilizer, No. 1 (DS-1) is also known as Chemical No. 10040097 and is available from Kodak by calling (716) 722-5545 or Faxing a P.O. to (716) 722-2175.

† The differences between the mix levels and the analytical specifications for CD-2 and sodium sulfite are to compensate for aer ation losses that occur during mixing and transfer of solution to the machine tank. The mix levels necessary to achieve the required analytical specification will vary with mixing equipment and solution transfer techniques.

‡ Developer specific gravity will rise from 1.020 ± 0.003 to 1.025 to ± 0.003 as the developer is seasoned.

To process VISION Premier Color Print Film, the normal replenisher flow rate must be increased by 8%. If the footage processed is less than one tank turnover, no change of pH is required in the replenisher, but small adjustment could be necessary in the tank processor. For larger quantity of VISION Premier Color Print Film (more than one tank turnover), it is recommended to increase the replenisher pH to 11.45.

Stop

Constituent	Fresh Tank	Fresh and Seasoned Tank	Fresh	Replenisher Analytical
		Analytical Specifications	Replenisher	Specifications
Stop	(SB-14)
Water 21-38°C (70-100°F)	900 mL		Same as Tank
Sulfuric Acid (7.0 N)	50 mL*
Water to make	1 L
pH at 25.0°C (77.0°F)		0.8 to 1.5

WARNING! May cause burns of skin and eyes. Avoid contact with eyes, skin, and clothing. In case of contact, immediately flush eyes and skin with plenty of water; for eyes, get medical attention.

*10 mL of concentrated sulfuric acid may be substituted.

Process ECP-2E Specifications 9-21