Kodak P461 manual Technical Spec ifications, Freq uently Asked Questions, 5x5, 4x6

Technical Spec ifications

Specification	KODAK P461 Personal Photo Scanner
	Photo: Up to 4.1 x 12” (Common use: 3.5x5” and 4x6” photo)
Media Type	Filmstrip: 35 mm Color / B&W Negative filmstrip
	Slide: 35 mm Color / B&W Mounted Slide
Common Document Size	3.5”x5”, 4”x6” and 4x11”
Actual Feed Slot Size	up to 4.1” x 12”
Length: 12 inches (304.8mm)

Width 4.1 inches (105mm)

Output file formats		JPEG with compression (4:2:2)
Resolution (fixed)		Photo: 600x600 dpi (default) and 300x300 dpi
		Filmstrip: 1200 x 1200 dpi
Interfaces	Memory Cards	Refer to Supported Memory Cards (pg 7)
	USB	Mini USB port compatible USB 2.0
USB Mass Storage Supported		WINDOWS 2000 / XP / VISTA / WINDOWS 7

Power

Batteries

Input 100-240V AC, 50/60 Hz, Output 5V, 1A

Takes four AAA (UM-4) batteries (not included). Recommend rechargeable batteries for optimal number of scans. Rechargeable battery life in 600dpi averages 100+ scans per charge. Actual battery life may vary based on usage.

Photo feeding	Sheet-fed type (single-pass)
	Twin roller design
Transparency feeding	Filmstrip fed with Filmstrip Guide Adapter
	Mounted Slides fed with Slide Holder
Dimensions	2.25” (L) x 10.5” (W) x 2” (H)
	61.7 mm (L) x 269.3mm (W) x 52 (H) mm
Net weight	0.75 lbs (455g)
Operating Temperature	15ºC ~ 35ºC (59oF~95oF);
Operating Humidity	20% RH ~ 70% RH
Storage Temperature	-20ºC ~ 60ºC (59oF~95oF);
Storage Humidity	10% RH ~ 90% RH

Freq uently Asked Questions

Q:What would cause strange lines on the scanned picture or unclear?

A:Check the following:

Are there scratches on the original, or is the original clean? Remove any stains or dust from the original before scanning.

Has the scanner been used for a long period of time without cleaning and calibration? Follow the instructions for "Cleaning the scanner" on page 18 and “Calibrating the scanner" on page 19, and then try again.

Q:Why isn’t the scanned filmstrip image rotating properly?

A:The current “auxiliary” OCR capability has difficulty distinguishing the direction of some numbers, (i.e.,“6”, “9”). If the number’s position is near the edge of the filmstrip, it can easily be worn out or damaged, and then it can’t be detected in the expected position, or meet the required conditions causing the Auto Mirror/Flip function to be disabled (see page 10). Please follow the indicator on the filmstrip guide adapter to re-scan the filmstrip.

Q:How do I clear an original that is stuck halfway in the feed slot?

A:Press the Power button; the scanner ejects the original so you can remove the jammed original from the feed slot in photo/slide scanning, and Transparency output slot in filmstrip scanning.

Customer Support: http://www.pandigital.net/kodaksupport 21