Kodak P461 Sca n P C Softwa re for Kodak P ersona l P hoto Sca nners, Install Scan PC Software

2.Click the ‘Safely remove USB mass Storage device’ message with the corresponding Drive.

3.When the ‘Safe to Remove Hardware’ message appears, you can safely remove the scanner’s USB cable.

For MAC users

On the desktop, right-click on the KODAKSCN volume, then select Eject “KODAKSCN”.

Sca n P C Softwa re for KODAK P ersona l P hoto Sca nners

With the Scan PC Software for KODAK Personal Photo Scanners (Scan PC Software), you can easily scan photos and save the scanned pictures directly to the connected PC.

System Requirements

Operating system: WINDOWS, XP SP2 or later, VISTA, WINDOWS 7 - 32-Bit

The Scan PC Software is not supported on the MAC OS

INTEL PENTIUM IV processor

1.2 GHz processor speed

512 MB RAM minimum

10MB free hard disk space for Scan PC Software for KODAK Personal Photo Scanners

200MB free hard disk space for KODAK EASYSHARE Software

NOTE: APPLE QUICKTIME Player is required for some software features. Visit APPLE to download the latest version of the QUICKTIME Player.

Install Scan PC Software

1.Connect the scanner to your PC (see page 13), using the KODAK MICROSD Mobile Memory Card

2.Open a Windows Explorer window.

3.Select

KODAKSCAN>KODAK>Software>KODAK_Scan_PC_Software_Setup_Vxxxx

4.Double-click the ScanPC_KODAK_Scanner_Setup_Vxxxx.exe file.

5.In the Install Wizard window, click Next.

6.Click Next to install in default location, or select desired location and then click

Next.

7.In the Ready to Install window, click Install.

8.After the software is installed, click Finish

Once installed, the Scan PC Software runs automatically upon PC startup, and theicon stays on the system tray.

If you want to close the Scan PC for KODAK Personal Photo Scanners software temporarily, right-click on the icon and select Exit.

Customer Support: http://www.pandigital.net/kodaksupport 15