Kodak VERSION 4.0, 4F3698 manual Display Aim, Display Automatic Calibration

B e fo r e C a l i b r a t i n g

Display Aim:

Enter the desired White Luminance for the monitor in ft-lamberts. Setting your monitor to the projector aim (typically 16 ft-lamberts) would make it too dark for other work. The display aim gives you the opportunity to set a higher display aim luminance.

Display - Automatic Calibration:

NOTE

The automatic calibration process tries to match all the values that you enter in this section.

•From the Target drop-down list, select your monitor preset target that you want to over-write during calibration.

•Set the Dark (code value). We recommend using the default settings.

•To override the projector Luminance and Chromaticity aim, check Override Projector Aim for Dark Patch. The value fields become active and you can enter new values for Dark Luminance (Y) and Dark Chromaticity (x,y). We recommend using the default settings.

NOTE

The Use Print Film Calibration Settings checkbox is available in the Display Manager System Print Film Edition. Select this checkbox to use the Print Film target values in calibration.

2 4 K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 0 U s e r ’ s G u i d e