Kodak VERSION 4.0, 4F3698 manual Click the Troubleshooting tab

Tr o u b l e s h o o t i n g

•(WINDOWS only) You may need to adjust the acceleration of your graphics card.

1)Close the Display Manager System.

2)Right-click the screen. From the pop-up menu, click Properties.

3)On the Settings tab, click Advanced.

4)Click the Troubleshooting tab.

5)Move the accelerator indicator back one stop to a slower setting. The default setting is Full.

6)Click OK.

7)Open the Display Manager System and load an image in the Viewer.

8)If the problem was not corrected, close the Display Manager System and repeat steps 2-7 until the problem is corrected. The goal is to keep the acceleration indicator as far to the right as possible and still have the Viewer work.

IMPORTANT

Do not use the lowest setting. Your computer may become unusably slow. Purchase a new video card if the next to the slowest setting does not work.

NOTE

(WINDOWS XP only) If slowing the acceleration does not solve the problem, deselect Enable write combining.

8 0 K O D A K D i s p l a y M a n a g e r S y s t e m V 4 . 0 U s e r ’ s G u i d e