Taking pictures and videos

Using P, A, S, M, and C modes

Aperture Shutter speed

ISO

Flash compensation Exposure compensation

Aperture—also known as f-stop, controls the size of the lens opening. (This determines the depth of field.) The highest and lowest aperture settings may be affected by optical zoom.

Aperture (f)

Depth of field

Larger f number

Makes both the foreground and the background sharp.

(smaller lens opening)

Good for landscapes and well-lit conditions.

 

 

Smaller f number

Makes the foreground sharp and the background blurry.

(larger lens opening)

Good for portraits and low-light conditions.

 

 

Shutter speed—controls how long the shutter stays open. A shaking hand icon

warns of slow shutter speeds. (To prevent camera shake, use a tripod.)

Exposure Compensation—controls how much light enters the camera. Add or subtract up to 2 EV in 0.3 EV steps. If the picture is too light, decrease the setting; if it’s too dark, increase the setting.

Flash Compensation—controls the flash brightness (brighter: +0.5, +1.0; less

bright: -0.5, -1.0). You must be within flash range. Unavailable if flash setting is Off.

ISO—controls sensitivity of the camera sensor (80, 100, 200, 400, 800). Higher settings are more sensitive to light, but may produce unwanted “noise” in a picture. You can only use ISO 800 if you are in the 1.8 MP Picture Size setting. (See Picture Size, page 22.)

13

www.kodak.com/go/support

Page 20
Image 20
Kodak Z730 manual Using P, A, S, M, and C modes, Aperture f Depth of field