Kodak Z730 manual Displaying pictures and videos on a television, Copying pictures and videos

Reviewing pictures and videos

Running a continuous slide show loop

When you turn on Loop, the slide show is continuously repeated.

1On the Slide Show menu, move the joystick to highlight Loop, then press the OK button.

2Move the joystick to highlight On, then press the OK button.

The slide show repeats until you press the OK button or until battery power is exhausted. This setting remains until you change it.

Displaying pictures and videos on a television

You can display pictures and videos on a television, computer monitor, or any device equipped with a video input. (Image quality on a television screen may not be as good as on a computer monitor or when printed.)

NOTE: Ensure that the Video Out setting (NTSC or PAL) is correct (see Video Out, page 28). The slide show stops if you connect or disconnect the cable while the slide show is running.

1Connect the audio/video cable (included) from the camera video-outport to the television video-in port (yellow) and audio-in port (white). See your television user’s guide for details.

2Review pictures and videos on the television.

Copying pictures and videos

You can copy pictures and videos from a card to internal memory or from internal memory to a card.

Before you copy, make sure that:

■A card is inserted in the camera.

■The camera’s picture storage location is set to the location from which you are copying. See Image Storage, page 25.

37 www.kodak.com/go/support