Getting started
www.kodak.com/go/support 2
Inserting the battery
CAUTION:
Use only a Kodak EasyShare rechargeable Li-Ion battery.
1Turn the Mode dial to Off.
2On the bottom of the camera, slide the battery door
and lift to open.
3Insert the battery as shown. Tilt the battery so the
battery lock is pushed to the side. Push the battery
into the battery compartment.
The battery lock holds the battery in place.
4Close the battery door.
Setting the date and time

Setting the date & time, first time

The
Date and Time have been reset
message appears the first time you turn on the
camera or if the battery is removed for an extended time.
1SET DATE & TIME is highlighted. Press the OK button.
2Go to step 4 in Setting the date & time, anytime.
Battery
lock