TROUBLESHOOTING
The information below gives details on what you can do as a user should you encounter difficulties whilst operating the shower.
If there is a problem with the shower control some of the push buttons will flash very fast.
Malfunction | Cause | Remedy |
|
|
|
Push buttons are | Water supply isolated | Check water supply |
flashing on the shower |
|
|
control and / or the | Damaged or broken cable | Check cable connections |
shower will not operate | connection |
|
| Electrical supply isolated | Check electrical supply |
| or fuse blown |
|
| Digital Mixer Valve | Isolate product and turn |
| breakdown | back on after 30 seconds |
|
| If the problem still |
|
| persists note the |
|
| sequence of the flashing |
|
| push buttons and |
|
| contact Customer |
|
| Services |
|
|
|
No flow or low flow rate | Spray plate assembly | Refer to Cleaning |
from the Shower Fittings | blocked |
|
| Hose blocked or twisted | Clear blockage or |
|
| release twist in hose |
| Digital Mixer Valve malfunction | Contact Customer Services |
|
|
|
Drip from spray plate | A small amount of water | This is quite normal. |
assembly on handset | may be retained in the | Changing the angle of |
| shower fitting after the | the shower fitting may |
| shower control has been | vary the draining time |
| turned off. This may drain |
|
| over a few minutes |
|
| Digital Mixer Valve | Solenoid fault. May |
| malfunction | require cleaning or |
|
| replacement. Contact |
|
| Customer Services |
|
|
|
Incorrect shower | Maximum temperature | Refer to Commissioning, |
temperature | incorrectly set | Maximum temperature |
|
| setting |
| Digital Mixer Valve incorrectly | Make sure that the hot |
| fitted | and cold water supplies |
|
| are connected correctly |
|
|
|
A
4
3
2 1
B
Handset Adjustment
To adjust the height of the handset press the release button ‘A’ and slide the clamp bracket assembly up or down to the desired position.
The handset can be moved both vertically and horizontally until the desired position is reached ‘B’. A friction mechanism in the clamp bracket will hold the handset in place.
Fixed Head Adjustment
Move the spray head to the required position. The spray head is adjustable in both the horizontal and vertical directions.
16 CFI230J | CFI230J 13 |
