Fit top cap - Non Water delivery side
C
STEP
46
Fit the door seal to the back edge of the door. When the door is closed the edge of the seal should touch the side panel along it’s length.
Fit top cap - Water delivery side |
C |
C |
STEP |
47 |
Apply a thin bead of sealant along the outside
edge of the wall channels.
Introduction
The following pages aim to provide comprehensive installation instructions, plus advice on how to care and maintain your product.
We recommend that the unit is installed by a qualified Plumber or Engineer. Please retain this document for future reference.
Note: Due to our desire to always improve our products, Daryl reserve the right to change specification without prior notice
Safety Precautions
Caution: Care should be taken when drilling into walls and floors to avoid any hidden pipes or wires.
We strongly recommend that all glass panels are moved by a minimum of two people and that protective packaging along the glass edges is kept in place for as long as possible to prevent damage before installation
Wear protective | Wear Safety |
footwear when | glasses when |
lifting panels | drilling |
People not familiar with the fitting of Daryl Products may require the assistance from another person at certain stages of the procedure. We have indicated these points in the process with
the Caution Symbol.
Caution
STEP
48
26 CFI230J
24hrs
Do not use the enclosure for
at least 24 hours.STEP 49
Care & Maintenance
The unit should be cleaned regularly.
Use a non abrasive cleaner (ideally with a pH value of 4 to 8) applied with a soft cloth.
Under no circumstances should scourers or powerful detegents be used as these can damage the metallic surface of the frame and also tarnish the glass coating.
If fitted correctly the unit should not require any maintenance other than cleaning. If problems do occur contact the Daryl Technical Helpline
Tel: 0151 606 5000
CFI230J 3