Kohler K1191-LC, K-1191-RC, K1191-R manual Test Run the Bath cont

Test Run the Bath (cont.)

Verify that the chromatherapy lights are operating. Upon start-up the lights should be changing through the color sequence. Press the light control switch (located directly across the bath from the power switch). The lights should stop sequencing and stay one color. Press the light control switch again and lights will deactivate.

Check the harness connections for leakage one more time.

Press the ″On/Off″ control switch again to turn off the unit. The switch will also turn off.

NOTE: For additional information on operation of your over¯owing bath, see ªUsing Your Bathº section.

1012493-2-A 10 Kohler Co.