E. ELECTRICAL REQUIREMENTS
The installation must have a Class A
4. INSTALLATION REQUIREMENTS
A. TOOLS REQUIRED | B. MATERIALS REQUIRED |
SConventional woodworking tools
SArc pliers or 14º pipe wrench
SRule
SLevel
SSafety shoes
SSafety glasses
SSquare
SScrewdriver
SPliers
SUtility knife
STin snips
SDrill with an assortment of bits and a hole cutting attachment
SPlumbers putty
SWall coverings, as necessary
SSilicone sealant
S2x4's
S2x6's (if additional grab bars are to be installed)
SDrop cloth
S#6
C. CLEARANCE REQUIREMENTS
Check the
Your new acrylic module is too large to fit through a standard door opening. The unit must be placed within the installation area prior to completion of framing. An optional procedure is to omit studs in one wall or to install studs without nailing, to allow moving the unit in place.
When moving the unit, avoid flexing the side walls or top to prevent radius cracking. No additional support under the basin area is required when unit is securely nailed into the recess.
NOTICE: Make sure the unit is within the installation area before final framing is completed. The unit will not fit through a standard door opening.
D.NEW OR REPLACEMENT INSTALLATION REQUIREMENTS
This unit can be installed in new or existing bathrooms.
For new installations: Position the plumbing according to the
For replacement installations: Remove the old bath. Remove the old wall material, and remove any old floor covering from the area. Remove any old plumbing that does not conform to
6 | Kohler Co., Kohler, WI |
