Garantía
GARANTÍA LIMITADA DE UN AÑO
Se garantiza que los productos de plomería KOHLER están libres de defectos de material y mano de obra por un año a partir de la fecha de instalación.
Kohler Co., a su criterio, reparará, reemplazará o realizará los ajustes pertinentes en los casos en que la inspección realizada por Kohler Co. determine que dichos defectos ocurrieron durante el uso normal en el transcurso de un (1) año a partir de la fecha de la instalación. Kohler Co. no se hace responsable de los gastos de desinstalación o instalación. El uso de limpiadores de inodoro que se colocan dentro del tanque anulará
la garantía.
Para obtener el servicio de garantía, comuníquese con Kohler Co. a través de su distribuidor, contratista de plomería o distribuidor a través de Internet, o escriba directamente a: Kohler Co., Attn.: Customer Care Center, 444 Highland Drive, Kohler, WI 53044, U.S.A. o llame al
TODA GARANTÍA IMPLÍCITA INCLUYENDO LAS DE COMERCIALIZACIÓN E IDONEIDAD DEL PRODUCTO PARA UN USO DETERMINADO, SE LIMITA EXPRESAMENTE A LA DURACIÓN DE LA PRESENTE GARANTÍA. KOHLER CO. Y/O EL VENDEDOR POR MEDIO DE LA PRESENTE DESCARGAN TODA RESPONSABILIDAD POR CONCEPTO DE DAÑOS PARTICULARES, INCIDENTALES O INDIRECTOS. Algunos estados/provincias no permiten limitaciones en cuanto a la duración de una garantía implícita o a la exclusión o limitación de daños particulares, incidentales o indirectos, por lo que estas limitaciones y exclusiones pueden no aplicar a su caso. Esta garantía le otorga ciertos derechos legales específicos. Además, usted puede tener otros derechos que varían de estado a estado y provincia a provincia.
El presente documento constituye la garantía exclusiva por escrito de Kohler Co.
Troubleshooting Guide
Symptoms | Recommended Action | |
1. | Poor flush. | A. Adjust the tank water level to match the waterline. |
|
| B. Fully open the water supply |
|
| C. Clear obstructions from the trapway, jet or bowl rim holes. |
|
| D. Clear obstructions in the soil pipe or vent pipe. |
2. | No flush. | A. Make sure the push button rods are in place. Adjust as needed, |
|
| following the directions in the Installation and Care Guide. |
3. | The fill valve | A. Adjust push button rods for proper slack so the flush valve seal |
| turns on/off by | isn’t held off the flush valve. |
| itself or it runs, | B. Clean or replace the flush valve seal if it is worn, dirty, or |
| allowing water | |
| misaligned with the valve seat or flush valve seat is damaged. | |
| to enter the | |
| C. Replace the flush valve gasket. | |
| tank. | |
|
| D. Clean the fill valve seat/seat washer of debris or replace the |
|
| piston/seat washer assembly. |
|
| E. Replace the fill valve if the valve float sinks. |
|
| F. Adjust the tank water level if it is too high. |
4. | Long tank fill | A. Fully open the water supply |
| cycle. | B. Clean the valve inlet, valve head, or supply line. Flush the lines. |
|
| |
|
|
|
Kohler Co. | 13 |