Kohler K-377 Install the Valve Body, Escutcheon, Apply, plumbers, putty, Shank, Washer, Hose

Escutcheon
Apply
plumbers
putty.
Valve Body	Shank
	Tee
Washer	Hose
	Nut

2. Install the Valve Body

Apply a bead of plumbers putty or other sealant to the underside of the escutcheons according to the manufacturer’s instructions.

Thread the hoses to the valve body outlets and wrench tighten. Do not overtighten.

Insert the valve bodies into the mounting holes from the top of the sink. Make sure the hot valve body is installed in the left-hand hole and the cold valve body is installed in the right-hand hole.

Install a washer and then a nut to the bottom of the valve bodies.

Align the valve bodies so the copper tubing faces the outside.

Wrench tighten the nuts.

Remove any excess plumbers putty.

Connect and wrench tighten the hoses to the shank tee. Do not overtighten.

1004636-2-D 4 Kohler Co.