Kohler K-T16115, K-T16116 Install the Faceplate and Handle, Scroll Handle, Traditional Handle

		Faceplate
Faceplate	Discard plaster	Screw
	guard with dome.

O-Ring

	Base	Washer
	Setscrew	Bonnet
Sleeve	Scroll	Traditional
Valve Stem		Handle
	Handle
Slot
Screw

5. Install the Faceplate and Handle

CAUTION: Risk of product damage to the K-306-KS valve assembly. When using this valve in a ®berglass or acrylic installation, use the Thin Wall Installation Kit (88526).

Remove and discard the plaster guard and/or dome, if installed. Rotate the valve stem fully counterclockwise to the ″Off″ position.

Install the faceplate onto the valve. Secure with two screws. Do not overtighten.

Slide the sleeve over the valve stem with the slot down and facing outward.

Scroll Handle

Install the handle to the base.

Secure with a screw.

Align the handle assembly and press it onto the valve stem.

Secure the handle in place with the setscrew. Tighten the setscrew to one quarter-turn past hand-tight.

Traditional Handle

Assemble the handle and bonnet.

Install the washer and O-ring onto the base.

Fit the handle assembly to the base.

Secure with a screw.

Kohler Co. 9 1025255-2-C