Apply plumbers putty.
Escutcheon
Standard
Shower Arm
Shower | Shower Arm |
| |
Elbow | Setscrew |
|
Showerhead
Apply plumbers putty.
Nonstandard
1/2"Shower Arm
Nipple
1/2"
2. Install the Showerhead
CAUTION: Risk of product damage. To avoid clogging the showerhead spray outlets, use thread sealant tape on the shower arm threads. Do not use thread sealant compound (pipe dope).
NOTE: A standard showerhead is shown.
Installing the Standard Showerhead
Remove the temporary nipple from the shower elbow.
Apply a bead of plumbers putty or other sealant to the back of the escutcheon according to the manufacturer's instructions.
Slide the escutcheon over the shower arm.
Apply thread sealant tape and install the shower arm to the shower elbow.
Carefully tighten with a clean strap wrench.
Press the escutcheon against the ®nished wall and secure with the setscrew.
Remove all excess putty.
Turn the main water supply on.
Run hot and cold water through the shower arm to ¯ush out dirt and debris.
Apply thread sealant tape to the shower arm and thread the showerhead to the shower arm.
Kohler Co. | 5 |
