Kohler K-T16117, K-T16115, K-T16116, K-T16139, K-T16113, K-T16114 Install the Spout, Threaded Spouts

Threaded Spouts

Nipple

3-7/8"

(9.8 cm)

Apply plumbers putty.

1. Install the Spout

CAUTION: Risk of internal seal damage. Do not use petroleum-based lubricants when installing slip-®t spouts. If the spout will not slide over the tubing, use soapy water or a silicone-based lubricant.

Remove the temporary nipple.

Apply thread sealant and install a 1/2″ nipple so it extends 7/16″ (1.1 cm) beyond the ®nished wall.

Apply a bead of plumbers putty or other sealant around the inlet end of the spout according to the manufacturer's instructions.

Apply thread sealant to the nipple and thread the spout onto the nipple.

Carefully tighten with a clean strap wrench.

Remove all excess putty.

1025255-2-C 4 Kohler Co.