4.8 Slim select bay module | 4 Replacement Procedures |
Installing the Slim select bay module
To install the slim select bay module, follow the steps below and refer to Figure
1.Install the connector cover holder to the optical drive assembly and secure it with the following screws.
• | M2⋅6S | BIND screw | ⋅1 |
• | M2⋅22S | BIND screw | ⋅1 |
2.Install the connector cover to the optical drive assembly and secure it with the following screw.
• M2⋅3S | ⋅1 |
3.Install the connector cover and connector to the optical drive assembly and secure it with the following screws.
• M2⋅6S BIND screw | ⋅2 |
4.Insert the slim select bay module into the computer to connect it to the connector on the system board. Press to ensure a firm connection.
5.Remove the following screw from the screw hole. Then secure the latch with the removed screw. (The slim select bay is locked.)
• M2.5⋅4B FLAT HEAD screw | ⋅1 |
TECRA S3 Maintenance Manual | [CONFIDENTIAL] |
