4 Replacement Procedures

4.17 Internal microphone

Installing the Internal microphone

To install the internal microphone, follow the steps below and refer to Figure 4-26.

1.Install the internal microphone to the slot of the front panel. (Pass the hole of the microphone rubber through the guide.)

2.Connect the microphone cable to the connector CN6050 on the system board.

3.Install the front panel in place and secure it with the following screws.

• M2.5⋅6S Tapping screw

⋅2

4-42

[CONFIDENTIAL]

TECRA S3 Maintenance Manual (960-532)

Page 284
Image 284
Toshiba S4 manual Replacement Procedures Internal microphone, Installing the Internal microphone