4 Replacement Procedures 4.8 Slim select bay module
4-20 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)
3. Remove the following screws, connector cover and connector from the optical drive
assembly.
• M2×6S BIND screw ×2
4. Remove the following screw and connector cover from the optical drive assembly.
• M2×3S S-FLAT HEAD screw ×1
5. Remove the following screws and connector cover holder from the optical drive
assembly.
• M2×6S BIND screw ×1
• M2×22S BIND screw ×1
Figure 4-9 Detaching the optical drive assembly
M2×6S BIND
M2×6S BIND
M2×3S S-FLAT HEAD
M2×6S BIND
M2×22S BIND