2.17 Fingerprint sensor

2 Troubleshooting Procedures

5.After displaying [Capture Fingerprint], scan the fingerprint of your right index finger on the finger sensor. When it successes the number at the center of display of display changes to “2”, then scan again. When it successes the number changes to “3”, again scan (total three times).

6.After displaying [Verify Fingerprint], scan the fingerprint of your right index finger on the finger sensor again. The message of “Verification Successful” is displayed. Click [Next] button.

7.When [Omnipass Enrollment Wizard] is displayed, you are asked if you want to register one more finger. Click [No].

TECRA S3 Maintenance Manual (960-532)

[CONFIDENTIAL]

2-67

Page 109
Image 109
Toshiba S4 manual Fingerprint sensor Troubleshooting Procedures