3 Tests and Diagnostics | 3.31 SETUP |
(c)Auto Power On
The Auto Power On has two functions. The result of setting in the sub- window (OPTIONS) is indicated as follows.
Disabled | Indicated when “Alarm time” set to “Disabled and “Wake- | ||||
|
|
| up on LAN” set to “Disabled”. | ||
Enabled | Indicated when “Alarm time” set to “xx:xx:xx” or “Wake- | ||||
|
|
| up on LAN” set to “Enabled”. | ||
|
|
|
|
|
|
|
| OPTIONS |
|
|
|
|
|
|
|
| |
|
|
|
|
|
|
|
| Alarm Time |
| = 00:00:00 |
|
|
| Alarm Date Option | = Disabled |
| |
|
| = Disabled |
| ||
|
|
|
|
|
|
Set the parameters for the Auto Power On (automatic power on) function and the
For the Alarm Time, set the time to turn on the power automatically. The “second” cannot be set. When it is set to “Disabled”, the time to turn on automatically is not set.
For the Alarm Date Option, set the date to turn on the power automatically. When it is set to “Disabled”, the time to turn on automatically is not set.
The
NOTE: 1. Do not remove the AC adaptor and battery pack at the same time when you use this feature. If you do so, data saved by the resume function will be lost. You must also reset this option.
2.If you have set a password and the computer boots by the Auto Power On function and Resume is on, the computer will start with the instant security function enabled. The password = message is not displayed; however, you must enter the password to use the computer.
3.This option is enabled only once, the setting is reset, after booting up.
(d)Diagnostic Mode
This option enables/disables the HW Diagnostic test function.
Disabled | Disables the HW Diagnostic test function. (Default) |
Enabled | Enables the HW Diagnostic test function. |
[CONFIDENTIAL] | TECRA S3 Maintenance Manual |
