Toshiba S4 manual Hdd, Replacement Procedures HDD, Removing the HDD

4 Replacement Procedures 4.6 HDD

4.6HDD

CAUTION: When handling the HDD, do not press the top surface as shown by the arrow. Hold it by the sides.

Removing the HDD

To remove the HDD, follow the steps below and refer to Figure 4-5 and 4-6.

1.Loosen the screw (with e-ring) fixing the HDD cover and slide your finger under the HDD cover and lift it up to remove.

2.Hold the tub to raise the HDD assembly straight and pull out the HDD assembly from the connector of the HDD cable.

HDD cover

Screw (with e-ring)

HDD assembly

HDD cable

Figure 4-5 Removing the HDD assembly

4-14 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)