3 Tests and Diagnostics | 3.4 Setting of the hardware configuration |
•Setting of the HWSC
•Setting of the UUID
•Display of the DMI information (including UUID)
After completion of the above settings, H/W configuration & DMI information are appeared in order. Check the contents and press Enter.
Subtest 03 DMI information save
NOTE: Before replacing the system board, be sure to execute this subtest and save the DMI information to the floppy disk.
This is one of tools to copy the DMI information to a new system board after replacing.
This subtest saves all the DMI data in a floppy disk.
Subtest 04 DMI information recovery
NOTE: 1. After replacing the system board, be sure to execute this subtest and copy the DMI information to a new system board.
2.Since the data of UUID is updated every time when this subtest, DMI information recovery, is done, the saved UUID data is not written.
This is one of tools to copy the DMI information to a new system board after replacing.
This subtest writes all the DMI data in the floppy disk into the new system board.
[CONFIDENTIAL] | TECRA S3 Maintenance Manual |
