4.26 Wireless LAN antenna/Bluetooth antenna

4 Replacement Procedures

3.Peel off eight acetate tapes and one insulator.

4.Peel off the wireless LAN antennas and Bluetooth antenna from the top cover and take them out.

Wireless LAN antenna

Bluetooth antenna

Acetate tape

Acetate tape

Insulator

Figure 4-50 Removing the wireless LAN antenna/Bluetooth antenna

Installing the Wireless LAN antenna/Bluetooth antenna

To install the wireless LAN antenna/Bluetooth antenna, follow the steps below and refer to Figure 4-49 and 4-50.

1.Stick the wireless LAN antennas and Bluetooth antenna to the top cover in place.

2.Seat the wireless LAN antenna cables and Bluetooth antenna cable on the top cover and stick eight acetate tapes and one insulator to fix them.

3.Pass the wireless LAN antenna cables through the hole of the middle frame and seat them in place.

4.Stick four insulators and one acetate tape on the back of the middle assembly.

TECRA S3 Maintenance Manual (960-532)

[CONFIDENTIAL]

4-67

Page 309
Image 309
Toshiba S4 Removing the wireless LAN antenna/Bluetooth antenna, Installing the Wireless LAN antenna/Bluetooth antenna