4.30 Fluorescent Lamp 4 Replacement Procedure
TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-99
6. Place the LCD panel (H) on the backlight unit (G).
CAUTION: Make sure there is no dust between the LCD panel and backlight unit. If any
dust is found, remove it with crepe tape or others, which has no remaining of
paste.
Figure 4-81 Replacing Sharp fluorescent lamp (XGA) (17)
Guide rib
Guide ribGuide rib
Guide rib
Make sure the LCD panel is installed in the
guide rib surely.
(
H
)
(G)