Toshiba S4 manual Memory module Replacement Procedures, Installing the Memory module

4.5 Memory module 4 Replacement Procedures

Installing the Memory module

To install the memory module, make sure the computer is in boot mode and powered off, follow the steps below and refer to Figure 4-4.

CAUTION: Do not touch the connectors on the memory module or on the computer. Dust and stains on the connectors may cause memory access problems.

1.Insert the memory module into the connector slantwise (terminal side first) and press it to connect firmly.

CAUTION: After installing the memory module, confirm that the memory module is fixed with the left and right latches.

2.Seat the memory slot cover and secure it with the screw (with e-ring).

3.When the power of the computer is turned on, the computer checks automatically the memory size. Confirm that the new memory is detected correctly.

4.If the memory is not detected, check that it is connected correctly.

TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 4-13