Toshiba S4 manual Audio CD, CD Sound Legacy test

3.30 Sound Test program 3 Tests and Diagnostics

3.30.3.2 Audio CD

Insert an audio CD and the following menu appears in the display.

CD/DVD TEST IN PROGRESS XXXXXXXX

xxxxxxxDIAGNOSTIC TEST VX.XX [Ctrl]+[Break] : test end

[Ctrl]+[C] : key stop

SUB-TEST	: XX
PASS COUNT : XXXXX		ERROR COUNT	: XXXXX
WRITE DATA	: XX	READ DATA	: XX
ADDRESS	: XXXXXX	STATUS	: XXX

CD Sound track number (01-98 : Track) ?

Drive #	=	0, ATAPI status =00
Command	=	XX
[[Block	address		=	XXXXXXXX]]
[[Block	length		=	XXXXXXXX]]

Final : Block address = XXXXXXXXX

Select the track number you want to test and press Enter twice.

The following message appears in the display and selected track is played.

Play start CD sound !

Press any key <play stop>

After pressing any key, the music stops and the display returns to the selection menu of the track number.

NOTE: When the CD-ROM test is executed, [ALL DEVICE] must be selected in the “Device Config.=” of the BIOS SETUP. If the “ALL DEVICE” is not selected, music can not be played.

3.30.4 CD Sound (Legacy) test

To execute the CD Sound (Legacy) test, select 4 and press Enter.

CAUTION: Sound (Legacy) test is not supported in this model.

TECRA S3 Maintenance Manual (960-532) [CONFIDENTIAL] 3-99