4 Replacement Procedures 4.27 Hinge
4-68 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)

4.27 Hinge

Removing the Hinge
To remove the hinge, follow the steps below and refer to Figure 4-51 to 4-53.
1. Remove the following screws and separate the display cover and middle frame.
M2×4B BIND screw ×4
M2.5×6S Tapping screw ×2
Figure 4-51 separating the display cover and middle frame
M2×4B BIND
Display cover
M2×4B BIND
M2×4B BIND
M2×4B BIND
M2.5×6S Tapping
M2.5×6S Tapping
Middle frame