Toshiba S4 manual Installing the HDD

4 Replacement Procedures 4.6 HDD

Installing the HDD

To install the HDD, follow the steps below and refer to Figure 4-5 and 4-6.

CAUTION: Do not hold the HDD by its top and bottom flat surfaces. It may damage the HDD.

1. Seat the HDD in the HDD bracket and secure them with the following screws.

• M3⋅4S FLAT HEAD screw ⋅4

CAUTION: Do not apply pressure to the middle of the HDD pack. It may damage the HDD assembly. Hold the HDD assembly by its corners.

2.Set the connector of the HDD cable upward and connect the HDD assembly to the connector. Press to ensure a firm connection.

3.Set the HDD assembly into the slot.

4.Seat the HDD cover and secure it with the screw (with e-ring).

4-16 [CONFIDENTIAL] TECRA S3 Maintenance Manual (960-532)