Appendices

Appendix J Maintenance of TOSHIBA RAID

J.2 Analysis and handling by Drive Log

Follow the below procedures to analyze.

Boot the independent utility and check the Physical Drive status.

(1) Which port of

Port 1

 

HDD failed?

 

Port 0

(2)If necessary, analyze the Drive Log and identify the cause of failure.

Replace the second HDD with new (good) one.

Replace the built-in HDD with the second HDD removed.

(3)Does operation miss cause it?

Yes

(4)Change the status of the failed HDD to “OFFLINE”.

No

(2)If necessary, analyze the Drive Log and identify the cause of failure.

Replace the second HDD with new (good) one.

End

Figure J-2 Flowchart of Analysis and handling by Drive Log

J-2

[CONFIDENTIAL]]

TECRA S3 Maintenance Manual (960-532)

Page 444
Image 444
Toshiba S4 manual Analysis and handling by Drive Log, Appendices Appendix J Maintenance of Toshiba RAID